IoT Gateways
IoT Modules
Netcom Products
Pusr Cloud, a cloudplatform for the Internet of Things Zero programming comes with its own Internet of Things system.
+ Private Cloud project
Data localization
Business personalization
+ Public Cloud registered
80% functions are free
White-labeling for VIP
PCB Design —— ODM/EMS We provide one-stop turnkey design service to help customers with the delivery of an out-of-the-box hardware platform that is fully tested and ready to use upon delivery.
+ years of experience
11 high-speed SMT
10 million pcs daily
+ Private Cloud project
ISO9001 cert.
Intelligent MES
November 8, 2022 Principle of Serial port to Ethernet server transparent transmission

Serial port to Ethernet server is a small electronic device that transmits TCP/IP data and serial port data in both directions.Its working principle is that when Serial port to Ethernet server is connected to the computer, it will create a virtual com port in the device manager of the computer, and send TCP/TP packets to the network through the com port. If the serial port sends 010110, the network receives 010110 data, and there is no protocol to process it.What are the common serial ports?

Serial port to Ethernet server

Common Serial Interface Definition

● RS232: An interface for exchanging serial binary data between two devices.

● RS485: An interface used to exchange serial binary data between serial devices. Compared with RS232, it supports multi-point two-way communication and supports multiple terminal devices linked to the same serial port during communication.

● RS422: An interface for exchanging serial binary data between serial devices. Compared with RS232, RS422 provides faster transmission rate and longer transmission distance. (The maximum transmission rate decreases as the cable length increases. The transmission rate is about 10 Mbit/s at 12 meters and drops to 90 kbit/s at 1200 meters).RS485 expands the interface application of RS422.

● TTL: TTL is a serial port form of serial port to Ethernet, and the above three are serial port forms of device side.

X.21: An interface for the exchange of signals between data terminal equipment (DTE), such as a user's computer, and digitized data circuit-terminating equipment (DCE).

● V.24: An interface supporting both synchronous and asynchronous transfer modes. When operating in asynchronous mode, the V.24 interface functions like an RS-232 interface.

V.35 is a universal terminal interface standardized by ITU-T for telephone network transmission. The interface began as a modem interface standard that used the bandwidth of multiple 60-108 kHz basic telephone circuits as a group to transmit synchronous data at a rate of 48 kbit/s. Currently, V.35 is used primarily for the Nx64 kbit/s data interface and has been replaced by the V.36 interface.However, the V.36 interface is still referred to as the V.35 interface.

Benefits of using Serial port to Ethernet server for networking

It is simpler and more reliable to use the serial port to connect the computer with the serial port device. When using the serial port, networking can be realized without installing a network card and setting an IP address.

The use of Serial port to Ethernet server not only has stable transmission, but also reduces the cost of network construction, does not require a dedicated line, and can run multiple serial devices on a single network port on the computer.

Copyright © Jinan USR IOT Technology Limited All Rights Reserved. / Sitemap / Privacy Policy
Copyright © Jinan USR IOT Technology Limited All Rights Reserved. Privacy Policy